微波再生载苯酚活性炭过程中再生产物分析

研究了载氮气和无载气2种条件下,微波再生载苯酚活性炭过程中再生产物的成分和苯酚随再生过程的去向分布。结果表明,无载气时,微波功率越高,再生反应器内温度越高,吸附质的高温裂解反应越彻底,再生产物以挥发性气体为主,有机质种类很少;而当微波功率较低或载氮气再生时,反应器内温度相对较低,苯酚难以被彻底分解,再生产物中含多种复杂的链状或环状有机物。此外,载氮气时,经气提、挥发而去除的苯酚量约占总吸附量的一半,再生炭上无苯酚残留,活性炭吸附性能可完全恢复乃至优化;无载气时,经挥发而去除的苯酚量只有19.9%,其余大量苯酚则在微波作用下裂解或缩合为其他物质随尾气而去除,且再生炭上仍有少量苯酚未被解吸出来。因此,前者活性炭再生的效果优于后者。     

乡村旅游产品提质升级策略探析

近年来,我国乡村旅游市场发展迅猛,涌现出大批乡村旅游接待点。但由于专业经营管理和市场理念不成熟,我国乡村旅游市场在产品品质、服务质量、经营管理等方面存在诸多问题,需要从乡村旅游产品系统出发,以文化提升、整合提升、体验提升和服务提升策略进行乡村旅游产品提质升级,保障乡村旅游市场的健康发展。     

乳化炸药密度在线检测技术

简述了常见密度在线检测方法,提出了一种采用数字称重技术间接在线测量炸药密度的新方法,建立了乳化炸药密度数字在线检测与控制系统,包括系统硬件电路的设计、硬件和电气线路的安装,以及软件程序连接和调试.研究表明,样品质量与检测系统的数字输出存在良好的线性关系,测量精度满足要求.因此,该系统可实现乳化炸药密度的在线实时测定,同时还可通过PLC实现敏化效果的自动反馈与调控,从而保证乳化炸药的敏化效果和产品质量.     

养生小镇旅游产品开发研究——以昆明市永定镇为例

养生旅游作为一种旅游新业态,是旅游业发展到一定阶段的一种新型旅游模式。昆明市永定镇具有优越的环境条件、资源条件和市场条件,适合打造成为发展养生旅游的养生小镇。永定镇养生旅游产品开发主要以"医疗昆明市养生"和"休闲养生"为核心产品,其产品价值表现为构筑核心竞争力;以"运动养生"、"农事养生"和"佛教养生"为重点产品,其产品价值表现为丰富养生旅游产品;以观光农业、康体运动和健康科普为配套产品,其产品价值表现为搭建养生旅游的基础平台。     

Facilitating substance phase‐out through material information systems and improving environmental impacts in the recycling stage of a product

The amount of electrical and electronic products is increasing rapidly, and this inevitably leads to the generation of large quantities of waste from these goods. Some of the generated e‐waste ends up in regions with sub‐standard recycling systems and may be processed under poor conditions. During uncontrolled incineration, halogenated dioxins and furans can be generated from brominated and chlorinated compounds in the products. In order to reduce the health and environmental risks involved in the recycling stage of the life cycle of electronics, an effective design‐for‐environment process must be established during the product development phase. Knowledge of the chemical substances in the product is crucial to being able to make informed decisions. Through full knowledge of the material content of procured components, phase‐outs of unwanted substances, such as halogenated substances, can be performed in an effective manner. Therefore, information is the key to success in phasing‐out substances; facilitating compliance of legal provisions for manufacturers of electrical and electronic devices; and improving the environmental footprint of products as they reach the end of the life cycle. After an introduction to the challenges of electronics waste management, this paper describes supply chain information systems and how they are used to facilitate substance phase‐outs in the electronics industry. Sony Ericsson has been working with phase‐outs of unwanted substances since it was founded in 2001. Through the introduction of a material declaration system that keeps track of all substances in the components used in the company's products, Sony Ericsson has been able to replace unwanted substances to improve environmental impacts at the recycling stage of a product.     

Sustainable consumption in Brazil: Identification of preliminary requirements to guide product development and the definition of public policies

Sustainable product development is closely related to sustainable consumption. The understanding of consumers' purchase, use and discard behaviours may facilitate the identification of requirements to guide manufacturers in the development of sustainable goods and services. The aim of this paper is to investigate consumers' perception about factors that motivate or discourage the consumption of sustainable products to identify demands and convert them into requirements. South Brazilian green and traditional consumers were asked to complete an exploratory qualitative questionnaire. Their answers were organized and compared to identify differences and similarities between the demands of these two groups. Furthermore, demands were converted into requirements for packages, products, manufactures, stores planning and discard systems. The interpretation of factors that motivate or discourage the purchase of sustainable products given by interviewees led to the creation of a list of possible public policies or programmes, aiming to support sustainable consumption. The results demonstrate the necessity of further quantitative investigation between consumer groups, for validation purposes.     

Radionuclide transfer to animal products: revised recommended transfer coefficient values

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as ‘TRS 364’. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 ‘expected’ values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.     

Matrine and oxymatrine in corroborant plant extracts and fertilizers: HPLC/MS-MS method development and single-laboratory validation

A reversed phase high-performance liquid chromatographic method (HPLC/MS-MS) has been developed and validated for detection of alkaloids matrine and oxymatrine in fertilizer with labeled enhancer plant defense activities. The analytical method was validated statistically. The results show a strong matrix effect, requiring quantification by standard addition method. The regression lines showed r² > 0.994. Recoveries ranging from 97 to 104% were obtained for the fortification level of 0.01% wt wt^?1 and the relative standard deviations ranged from 3 to 4% (n = 10). The limits of detection were below 0.0001% wt wt^?1, while the limits of quantification did not exceed 0.0004% wt wt^?1. The method is currently applied in ICQRF Laboratory of Catania on fertilized and corroborant plant extract collected in the Italian market in the frame of MIPAAF institutional quality control activity, with the aim to dectect these unpermitted active substances.     

Value of information in product recovery decisions: a Bayesian approach

There is a widespread recognition of the need for better information sharing and provision to improve the viability of end-of-life (EOL) product recovery operations. The emergence of automated data capture and sharing technologies such as RFID, sensors and networked databases has enhanced the ability to make product information; available to recoverers, which will help them make better decisions regarding the choice of recovery option for EOL products. However, these technologies come with a cost attached to it, and hence the question ‘what is its value?’ is critical. This paper presents a probabilistic approach to model product recovery decisions and extends the concept of Bayes' factor for quantifying the impact of product information on the effectiveness of these decisions. Further, we provide a quantitative examination of the factors that influence the value of product information, this value depends on three factors: (i) penalties for Type I and Type II errors of judgement regarding product quality; (ii) prevalent uncertainty regarding product quality and (iii) the strength of the information to support/contradict the belief. Furthermore, we show that information is not valuable under all circumstances and derive conditions for achieving a positive value of information.     

添加氮损失抑制剂对蓝藻泥堆肥质量的影响

对脱水蓝藻进行大型生产性堆肥实验。研究堆肥过程中,氮损失抑制剂过磷酸钙的添加对堆肥物料各类理化性质的影响。研究结果表明,过磷酸钙加入的处理组与未加过磷酸钙的对照组堆制37 d后堆肥物料均可腐熟,且堆肥肥效均符合NY525-2002的相关要求。添加过磷酸钙处理组有机质含量为490 g/kg,全N、全P和全K含量分别为20.75、10.02和11.32 g/kg,总养分含量达到9.77%,堆肥品质明显优于对照处理。同时,在微生物的作用下,对照组中微囊藻毒素MC-RR与微囊藻毒素MC-LR去除率分别达到89.8%与78.3%。值得一提的是,添加过磷酸钙后,MC-RR和MC-LR的去除率得到进一步提高,分别达到了92.96%和100%,较好地保证了蓝藻堆肥农用的安全性,为脱水蓝藻好氧堆肥化提供了可行性依据。